Hy-Com Communications Ltd.

ICOM Receivers

Canadian Versions are Unblocked

[IC-R6] [IC-R20] [IC-R75] [IC-RX7]
[IC-R2500] [IC-R8500] [IC-R9500]
Brochures and Operator's Manuals
are available as PDF files below		 Download the free
Adobe Acrobat Reader

Contact us for the best price!
Or see our price page

IC-R6 - Compact Wideband Handheld Receiver

The IC-R6 is ICOM's ultra compact, super wide band handheld receiver.

Get winning performance with Icom's new IC-R6. Crisp, clear audio. Super wide tuning range. A large, easy-to-read LCD display with the visual information you need - like operating status, signal strength, battery indicator, and alphanumeric naming for the 1300 memory channels. All in a compact, weather resistant package.

With the computer software and cable package (CS-R6), programming is easy. The CS-R6 allows you to customize the IC-R6 for memory channels, scan lists, scan ranges and many other radio settings.

Wide Band Receive

100 kHz - 1309.995 MHz, AM/FM/WFM. Listen to AM & FM broadcast radio stations, police, fire, military, aircraft, various amateur bands, and more.

And, let's not forget, the IC-R6 is a full-blown receiver with full broadcast AM, FM, reception, along with an Internal Bar antenna for clear reception of the AM broadcast bands.

Memory channels

1300 Memory Channels With alphanumeric naming. Quickly tune to your favorite frequencies!

Versatile power requirements

Operation of the IC-R6 is possible from a wide variety of power sources with the external DC port and Icom's use of 2 AA-size batteries. Whether Dry Cell, Alkaline, or the newer rechargeable batteries, the IC-R6 will give you hours of operation. The external DC jack also provides a power source and acts as a charger for AA NiMH-type batteries.

Rugged Construction

Weather resistant construction make the IC-R6 great for active outdoor operation.

PC programmable

Connect to your PC for programming & cloning. Optional software (CS-R6) & cable (OPC-474) are required. USB type cable (OPC-478U) is also available. Cellular unblocked version available in Canada.

Download the IC-R6 PDF brochure.

Pricing for the IC-R6 and options.

IC-R20

Scan, Monitor, Record - the Pro's Scanner!

Dual Watch receive! Listen to two frequencies at once! Until the IC-R20, the capability of monitoring two frequencies required two radios. Whether you need to monitor local public safety, air traffc control, or at the track listening to two drivers, even the play by play from both the local TV and radio station is possible!

The IC-R20 has an internal 32MB digital recorder capable of storing received communications. This feature is useful in a variety ways, like recording a wireless microphone audio at a meeting. There is also a USB port to download to a computer for storage or to forward to a friend. (PC playback not possible)

* Cellular unblocked version available in Canada.


Download the IC-R20 PDF brochure.
More detailed IC-R20 specifications and options.
Pricing for the IC-R20 and options.

IC-RX7 Wideband handheld receiver

Slim and smart wideband receiver

Easy to use menu interface

Download the IC-RX7 PDF brochure.
Download the IC-RX7 PDF Instruction Manual.
Accessories - PDF
Pricing for the IC-RX7 and options.

IC-R75 - Base Receiver

The IC-R75 is ICOM's HF/50 MHz all mode base receiver

Download the IC-R75 PDF brochure.
Download the IC-R75 PDF owner's manual.

More detailed IC-R75 specifications and options.
Pricing for the IC-R75 and options.

IC-R2500

Dualwatch, Digital Mode, Diversity Receiver

Dualwatch capability*1
The IC-R2500 has dualwatch receive capability*1, allowing you to receive two bands simultaneously. It covers 0.01-3299.999 MHz in AM, FM, WFM, SSB, CW, DV*2 and P25*3 modes on the main receiver, while the sub-receiver covers 50-1300MHz in AM, FM and WFM modes*4.

*1 Two antennas are required for dualwatch receive.
*2 Optional UT-118 required.
*3 Optional UT-122 required. Already installed with some versions.
*4 Frequency range differs depending on version.

Wide LCD display
for independent band control The wide LCD display shows both main/sub receiver settings in an easy-to-read symmetric side-by-side layout. The controller provides separate tuning, volume, squelch knobs and function buttons for the left (Main) and right (Sub) receivers. The LCD backlit color is selectable between amber and green for your preference.

Digital mode reception
The optional UT-118 D-STAR digital unit and UT-122* P25 digital unit provide the latest digital mode reception. Catch the action in digital communications!
* Already installed with some versions.

Diversity receive capability
The diversity receive* mode is useful for mobile operation where the received signal changes continuously. It compares the signal strength and chooses the antenna with the better signal to maintain good sound and receive quality.
* Two antennas are required. Available in FM/DV/P25 mode between 50-1300MHz only. Diversity reception is not available while using dualwatch.

1000 alphanumeric memory channels
With Icom's Dynamic Memory Scan, DMS, you have a versatile memory channel management system at your command. The 1000 memory channels can be arranged by service or personal preference in the 21 memory banks. Selectively link the channels together to scan depending on your needs. Programming the memory channels and 6 character memory names is simple with your PC.

Other features

Supplied accessories *depending on version

System Requirements (For use with PC control software)

*Additional hard disk space is required for recording sound or storing scope data
*All stated specifications are subject to change without notice or obligation.

Download the IC-R2500 PDF brochure.

Pricing for the IC-R2500 and options.

IC-R8500

Next Generation Base Receiver

WHAT THE EXPERTS SAY:

"BOTTOM LINE: A top-notch receiver/scanner with quality and features to please the discriminating and serious SWL or monitoring buff.
This handsome receiver is a terrific centerpiece or complement to any listening shack."

--QST, April 1997. Reprinted with permission of the ARRL

"...it's on HF where the ICOM really shines. The R8500 has both a Noise Blanker circuit and Intermediate Frequency Shift that really help reduce or eliminate interference on shortwave frequencies.
The ICOM's Audio Peak Filter is also very effective at helping voices to 'pop out' of the HF background noise."

--Popular Communications, February 1997

"R8500 construction is impressive. A rugged, die-cast aluminum chassis is used to hold and shield the various circuit boards.
The large padded tuning knob and rubber keys exude quality and are easy to operate....
The yellow backlit LCD display has excellent contrast, making it much easier to read...."

--Monitoring Times, January, 1997

Easily enhance the IC-R8500's already impressive basic controls with programming software available from third party developers

Download the IC-R8500 PDF brochure.
Download the IC-R8500 PDF owner's manual.

More detailed IC-R8500 specifications and options.
Pricing for the IC-R8500 and options.

*Cellular unblocked version available in Canada.

IC-R9500

Professional communications receiver with 0.005 to 3335MHz coverage

Basic Performance - Wideband coverage
The IC-R9500 covers 0.005-3335 MHz in SSB, AM, FM (WFM), CW, FSK and P25* modes. It is suitable for a wide variety of radio monitoring and listening activities.
* Optional UT-122 digital unit is required.

Superb receiver performance
The IC-R9500 achieves amazing performance by using a D-MOS FET array in the 1st mixer (below 30MHz) and an excellent IMD roofing filter. The IC-R9500 has +40dBm IP3 and 109dB dynamic range at 14.1MHz. IP3 performance is +9.8dBm at 50MHz and +6.2dBm at 620MHz (+5dBm (typical) from 30MHz to 3335MHz).

Five roofing filters
The IC-R9500 has 5 independent roofing filters (240, 50, 15, 6 and 3kHz) for improved selectivity. In very crowded RF spectrum conditions, it is extremely important to protect against strong in-band signals. The 3kHz roofing filter provides a 130dB (approx.)* blocking dynamic range.
* At 15MHz reception, with 5kHz separation signals.

Dual DSP
The IC-R9500 incorporates two independent, 32-bit floating point DSP units, a dedicated DSP unit for receiver functions and another for the spectrum scope. By using the power of two independent DSP units, the radio can respond to operator changes in an instant.

±0.05ppm high frequency stability
The IC-R9500 uses an OCXO (Oven Control Crystal Oscillator) unit which provides ±0.05ppm frequency stability from 0°C to 50°C. The 10MHz reference frequency can either be supplied to or input from external equipment.

Digital IF filter
The digital IF filter* allows the operator to adjust the filter shape (sharp or soft), filter bandwidth, and center frequency characteristics. The digital twin PBT narrows and shifts the IF passband to efficiently eliminate undesired signals.
* For FM, WFM and P25 mode, the passband width is fixed.

Spectrum Scope
Multi function spectrum scope Using a dedicated DSP unit improves the dynamic range of the spectrum scope.
The IC-R9500 has four different spectrum modes such as normal/wide and center/fixed width. The normal spectrum scope covers a range from +/-2.5kHz to +/-5MHz, while the wide band spectrum scope* observes up to ±500MHz ±10MHz, ±25MHz, ±50MHz, ±100MHz ±250MHz and ±500MHz selectable). When using the normal spectrum scope, the digital scope's filter width can vary from 200Hz to 20kHz with a variable sweep speed.
The spectrum scope can also be set to use specific scope edges or to center the span on the receiving frequency. The peak search function automatically moves the display marker to the strongest signal on the scope screen. In addition to these features, the scope has 3 levels of attenuation (10dB, 20dB, 30dB).
* While using the wide band scope function, AF output is muted.

Functions 7-inch wide color TFT LCD
The large 7-inch wide (800 x 480 pixels) active matrix display delivers quick response time, high resolution and has a wide viewing angle. The multi-function spectrum scope is displayed in vivid color. The background color is selectable from black or blue for your preference. In addition, the IC-R9500 has a VGA connector allowing you to connect an external monitor.

Multiple RSSI
S-meter, dBµ, dBµ(emf) and dBm meter types are selectable in the IC-R9500. The dBµ, dBµ(emf) and dBm meter have ±3dB of accuracy (10 to 70dBµ signal from 100kHz to 3335MHz at 25°C).

Noise blanker
The IC-R9500 has the DSP controlled noise blanker that significantly reduces pulse type noise and improves the S/N ratio by removing interfering noise. The noise blanker has two channels with adjustable width and depth parameters. You can use these to target the specific noise interference.

Two-point manual notch filter
The digital manual notch filter has a depth of more than 70dB at two points with adjustable filter width (wide, middle, narrow). This means that two strong beat signals can be eliminated at once even while using the auto notch filter.

Synchronous AM detection
The synchronous AM (S-AM) detection provides less distor ted audio than normal diode detection. This mode is useful when fading occurs or signal level is low. The IC-R9500 can recreate the carrier signal exactly by using the DSP. In addition, upper or lower sideband demodulation for S-AM is selectable for eliminating inter ference from adjacent strong signals.

FSK modulator & decoder
The IC-R9500 has built-in FSK demodulator and decoder.

10 VFOs
The IC-R9500 has 10 VFO channels for tuning and storing operating frequencies, mode, filter width and other settings. For example, use VFO-1 for the 7MHz band, VFO-2 for the VHF marine band,VFO-3 for the 1200MHz band, etc. You can quickly change the operating bands with the 10-keypad. When the VFO is changed, the settings are automatically stored in that VFO channel.

A total of 1220 memory channels
The IC-R9500 has a total of 1220 memory channels. Store frequencies, modes, filter width and tuning steps. Memory channels are grouped into 10 memory banks. By connecting to a USB keyboard, you can edit memory contents directly.

Digital voice recorder
The IC-R9500 has two types of digital voice recorders. One is the regular recorder, recording for long periods in "WAV" format into the built-in CF memory or an external USB memory. The sampling rate is variable from 8kHz (SQ1) to 48kHz (SHQ). In SQ1 mode, up to 130 minutes (approx.) of recorded audio can be stored into the CF memory. The other recorder is the shor t voice recorder, which saves the previous 15 seconds of radio audio into RAM, allowing you to play back the audio instantly.

Multi-scan functions
Numerous scanning functions to search for desired stations are available to make operation easier. The IC-R9500 scans 40 channels per second in memory scan mode.

Additional outstanding features

Supplied Accessories

Download the IC-R9500 PDF brochure.
Pricing for the IC-R9500 and options.

Back to the top

Back to the main index page

The ICOM logo is a registered trademark of ICOM, Inc. All ICOM radios significantly exceed FCC regulations limiting spurious emissions. All stated specifications are subject to change without notice or obligation.