Hy-Com Communications Ltd.
ICOM Land Mobile VHF and UHF Mobile Radios
VHF
[IC-F121]
[IC-F121S]
[IC-F521]
[IC-F5021]
[IC-F5061]
[IC-F1721]
[IC-F1821]
UHF
[IC-F221]
[IC-F221S]
[IC-F621]
[IC-F2020]
[IC-F6021]
[IC-F6061]
[IC-F2721]
[IC-F2821]
Contact us for the best price!
Or see our price page
IC-F121 VHF Mobile Transceiver
(Discontinued, Limited Stock Left)
FEATURES
- Ideal complement to the IC-F11 handheld radio
- 136-174 MHz
- Powerful 50W Output
- Dimensions: 15 cm.(W), 4 cm.(H), 17 cm.(D), 1.1 kg
- Dimensions: 5 29/32"(W), 1 9/16"(H), 6 19/32"(D), 2.4 lb.
- 6 Programmable Buttons and Independent Volume Knob
- 4W typ. Front-mounted Speaker
- 128 Memory Channels with 8 Memory Banks
- 8-Character Alphanumeric Display
- Flexible Hanger Actions
- Built-in 2-Tone, 5-Tone, CTCSS, DTCS Encoder & Decoder
- Advanced Multi 2-Tone/5-Tone Systems
- Standard DTMF Encoder and Optional DTMF Decoder with ANI Function
- 7 autodialing DTMF memories
- Programmable Wide/Narrow Channel Spacing for Each Channel
- 2.5kHz Channel Step
ADDITIONAL FEATURES
- 2 priority channels
- Emergency call (DTMF code) with single or repeat function
- Advanced Multi 2-Tone/5-Tone systems
- Programmable actions when a matched tone is received
- Bell icon indication ON/OFF/Blink
- Answer back calls
- Beep sounds
- Scan Start/Stop
- Auto transmission
- Stun/Kill functions (prevents use of a lost or stolen radio)
- External out for horn drive (Optional OPC-617 is required)
- 32 Tx and 9 Rx 5-Tone codes available
- 11 Tx and Rx 2-Tone codes available
- Hook scan function and Hook scan ON/OFF button are assignable
- 10 scanning lists and normal/priority scan
- Power on password available
- Optional Voice Scrambler, UT-109/UT-110
- SmarTrunk™ or LTR® Trunking capability with optional UT-105 or
UT-111, respectively
- Backlit LCD and keys for night time operations
- Meets MIL-STD 810 C, D, E and F specifications
Download the IC-F121/F221 Series PDF brochure.
Download the IC-F121/F221 Series PDF owner's manual.
More detailed IC-F121, IC-F121S specifications and options.
Pricing for the IC-F121 and options.
IC-F121S VHF Mobile Transceiver
FEATURES
- Ideal complement to the IC-F11S handheld radio
- 136-174 MHz
- Powerful 50W Output
- Dimensions: 15 cm.(W), 4 cm.(H), 17 cm.(D), 1.1 kg
- Dimensions: 5 29/32"(W), 1 9/16"(H), 6 19/32"(D), 2.4 lb.
- 6 Programmable Buttons and Independent Volume Knob
- 4W typ. Front-mounted Speaker
- 8 Memory Channels with 2 Memory Banks
- LED Display
- Flexible Hanger Actions
- Built-in 2-Tone, 5-Tone, CTCSS, DTCS Encoder & Decoder
- Advanced Multi 2-Tone/5-Tone Systems
- Standard DTMF Encoder and Optional DTMF Decoder with ANI Function
- 7 autodialing DTMF memories
- Programmable Wide/Narrow Channel Spacing for Each Channel
- 2.5kHz Channel Step
ADDITIONAL FEATURES
- 2 priority channels
- Emergency call (DTMF code) with single or repeat function
- Advanced Multi 2-Tone/5-Tone systems
- Programmable actions when a matched tone is received
- ON/OFF/Blink
- Answer back calls
- Beep sounds
- Scan Start/Stop
- Auto transmission
- Stun/Kill functions (prevents use of a lost or stolen radio)
- External out for horn drive (Optional OPC-617 is required)
- Hook scan function and Hook scan ON/OFF button are assignable
- normal/priority scan
- Power on password available
- Optional Voice Scrambler, UT-109/UT-110
- SmarTrunk™ or LTR® Trunking capability with optional UT-105 or UT-111, respectively
- Backlit LCD and keys for night time operations
- Meets MIL-STD 810 C, D, E and F specifications
Download the IC-F121S/F221S Series PDF brochure.
More detailed IC-F121, IC-F121S specifications and options.
Pricing for the IC-F121S and options.
IC-F5021 - Mobile VHF Transceivers
IC-F6021 - Mobile UHF Transceivers
(New, more information soon)
IC-F521 - Mobile VHF Transceivers
(Limited Availability)
The mobile of choice for today’s professional.
Click on the small image to get a large picture.
Specifications:
- Dimensions: 5.5 (W), 1.6 (H), 6.7 (D); 2 lb, 10 oz
- 25 W output power on IC-F520 version OR 50 W on IC-F521 version
- 4 W audio output
- 136-174 MHz
- 256 channels
- SIGNALING
- CTCSS, DTCS encode/decode
standard
- Built-in 2 tone
- DTMF ANI with UT-108
- TRUNKING
- SmarTrunkII® optional
- LTR® optional
- 9 programmable buttons
- Independent AF volume knob
- 10 character alphanumeric LCD
- Invertible chassis to point the speaker up or down, for ease of installation
- Backlit keys
- Flash CPU advantage for future applications
- Fractional-N PLL provides faster lock up times
- Power on password and 'stun' features
- Microphone hanger function
- Normal/priority scan
- Built-in audio compander
- DTMF optional (HM-100TN required), DTMF redial and DTMF autodial
- MIL SPEC 810 C, D, E, F for:
- Low pressure
- High temperature
- Low temperature
- Temperature shock
- Solar radiation
- Rain
- Humidity
- Salt fog
- Dust
- Vibration
- Shock
Download the IC-F521/F621 PDF brochure.
More detailed IC-F520/F521 specifications and options.
Pricing for the IC-F520/521 and options.
IC-F221 UHF Mobile Transceiver
FEATURES
- Ideal complement to the IC-F21 handheld radio
- Powerful 45W Output
- Dimensions: 15 cm.(W), 4 cm.(H), 17 cm.(D), 1.1 kg
- Dimensions: 5 29/32"(W), 1 9/16"(H), 6 19/32"(D), 2.4 lb.
- 6 Programmable Buttons and Independent Volume Knob
- 4W typ. Front-mounted Speaker
- 128 Memory Channels with 8 Memory Banks
- 8-Character Alphanumeric Display
- Flexible Hanger Actions
- Built-in 2-Tone, 5-Tone, CTCSS, DTCS Encoder & Decoder
- Advanced Multi 2-Tone/5-Tone Systems
- Standard DTMF Encoder and Optional DTMF Decoder with ANI Function
- 7 autodialing DTMF memories
- Programmable Wide/Narrow Channel Spacing for Each Channel
ADDITIONAL FEATURES
- 2 priority channels
- Emergency call (DTMF code) with single or repeat function
- Advanced Multi 2-Tone/5-Tone systems
- Programmable actions when a matched tone is received
- Bell icon indication ON/OFF/Blink
- Answer back calls
- Beep sounds
- Scan Start/Stop
- Auto transmission
- Stun/Kill functions (prevents use of a lost or stolen radio)
- External out for horn drive (Optional OPC-617 is required)
- 32 Tx and 9 Rx 5-Tone codes available
- 11 Tx and Rx 2-Tone codes available
- Hook scan function and Hook scan ON/OFF button are assignable
- 10 scanning lists and normal/priority scan
- Power on password available
- Optional Voice Scrambler, UT-109/UT-110
- SmarTrunk™ or LTR® Trunking capability with optional UT-105 or
UT-111, respectively
- Backlit LCD and keys for night time operations
- Meets MIL-STD 810 C, D, E and F specifications
Download the IC-F121/F221 Series PDF brochure.
More detailed IC-F221, IC-F221S specifications and options.
Pricing for the IC-F221 and options.
IC-F221S UHF Mobile Transceiver
FEATURES
- Ideal complement to the IC-F21S handheld radio
- Powerful 45W Output
- Dimensions: 15 cm.(W), 4 cm.(H), 17 cm.(D), 1.1 kg
- Dimensions: 5 29/32"(W), 1 9/16"(H), 6 19/32"(D), 2.4 lb.
- 6 Programmable Buttons and Independent Volume Knob
- 4W typ. Front-mounted Speaker
- 8 Memory Channels with 2 Memory Banks
- LED Display
- Flexible Hanger Actions
- Built-in 2-Tone, 5-Tone, CTCSS, DTCS Encoder & Decoder
- Advanced Multi 2-Tone/5-Tone Systems
- Standard DTMF Encoder and Optional DTMF Decoder with ANI Function
- 7 autodialing DTMF memories
- Programmable Wide/Narrow Channel Spacing for Each Channel
- 2.5kHz Channel Step
ADDITIONAL FEATURES
- 2 priority channels
- Emergency call (DTMF code) with single or repeat function
- Advanced Multi 2-Tone/5-Tone systems
- Programmable actions when a matched tone is received
- ON/OFF/Blink
- Answer back calls
- Beep sounds
- Scan Start/Stop
- Auto transmission
- Stun/Kill functions (prevents use of a lost or stolen radio)
- External out for horn drive (Optional OPC-617 is required)
- Hook scan function and Hook scan ON/OFF button are assignable
- normal/priority scan
- Power on password available
- Optional Voice Scrambler, UT-109/UT-110
- SmarTrunk™ or LTR® Trunking capability with optional UT-105 or UT-111, respectively
- Backlit keys for night time operations
- Meets MIL-STD 810 C, D, E and F specifications
Download the IC-F121/F221 Series PDF brochure.
More detailed IC-F221, IC-F221S specifications and options.
Pricing for the IC-F221 and options.
IC-F621 - Mobile VHF Transceiver
(Limited Availability)
The mobile of choice for today’s professional.
Click on the small image to get a large picture.
Specifications:
- Dimensions: 5.5 (W), 1.6 (H), 6.7 (D); 2 lb, 10 oz
- 45 W output power on IC-F621 version
- 400-430 MHz, or 440 – 470 MHz
- 4 W audio output
- 256 channels
- SIGNALING
- CTCSS, DTCS encode/decode standard
- Built-in 2 tone
- DTMF ANI with UT-108
- TRUNKING
- SmarTrunkII® optional
- LTR® optional
- 9 programmable buttons
- Independent AF volume knob
- 10 character alphanumeric LCD
- Invertible chassis to point the speaker up or down, for ease of installation
- Backlit keys
- Flash CPU advantage for future applications
- Fractional-N PLL provides faster lock up times
- Power on password and 'stun' features
- Microphone hanger function
- Normal/priority scan
- Built-in audio compander
- DTMF optional (HM-100TN required), DTMF redial and DTMF autodial
- MIL SPEC 810 C, D, E, F for:
- Low pressure
- High temperature
- Low temperature
- Temperature shock
- Solar radiation
- Rain
- Humidity
- Salt fog
- Dust
- Vibration
- Shock
Download the IC-F621 PDF brochure.
Download the IC-F620 PDF instruction manual.
More detailed IC-F621 specifications and options.
Pricing for the IC-F621 and options.
IC-F5061 (VHF) and IC-F6061 (UHF) - Mobile Transceivers
Multi-Mode Professional Mobile.
The IC-F5061/F6061 is ideal for public safety, transportation and delivery service users. It offers advanced multi-mode operations, improved scanning and flexible installation suitable for mobile and base stations.
MDC 1200 Compatible
Advanced automatic number identification (ANI), selective call (Selcall) and emergency call features are available with the built-in MDC signaling. The PTT ID function sends your unit ID number when you push (or release) the PTT button. The received ID number can be decoded to a user name using the alias table. The selcall enables you to call individual or group users as you desire. The emergency call feature allows you to send and repeat an emergency message to dispatch until the dispatch responds to it. In such a situation, the radio can transmit anything the microphone hears and the dispatcher can monitor the background sound. Radio check, status, message, radio stun, revive and call log are also available.
6.25kHz Digital mode ready
With the optional UT-119H, the IC-F5061 series provides 6.25kHz digital narrow mode communication that meets the FCC 6.25kHz emission mask requirements for narrow banding, and increases efficiency of channel allocation and use of spectrum. The IC-F5061 series provides 2 optional slots: one for the UT-119H digital unit and one for another option board.
Detachable front panel
With the optional remote control kit, RMK-3 and separation cable, the front panel of the radio can be detached from the main unit. It allows you flexible installation even in limited installation space. Separation cable length is selectable from 1.9m, 3.0m and 8.0m.
Dot matrix, multi-function LCD
With a high contrast dot matrix display, upper and lower case characters can be easily distinguished. You can change the display setting to show one line and 12 characters, or two lines and 24 characters via programming. LCD backlighting is standard.
Front mounted speaker
4 watts (typ.) front mounted speaker delivers clear and loud audio. The built-in audio compander improves the signal to noise ratio.
IP54 dust-protection and splash resistance (Controller only)
The rugged die-cast chassis and polycarbonate front panel are resistant to shock and vibration. When used with the optional separation kit, the remote control head has dust-protection and splash resistant construction, equivalent to IP54.
Wide frequency range and large channel capacity
The IC-F5061 series covers a wide frequency range in one version (VHF 136-174 MHz, UHF 400-470MHz). The 512 memory channel capacity with 128 zones allows you to divide and store a variety of flexible channel groupings.
Basic LTRR/Conventional mode operation
Group, selective, and phone calls are all available in LTRR mode. The beep on receive function informs you with a beep sound when an individual call is received
Multiple 2-Tone, 5-Tone signalings
The built-in 2-Tone and 5-Tone capabilities allows you to send a tone code with your call and decode multiple tone codes on a channel. 40 pairs of CTCSS/ DTCS memory channels are available.
Voting scan
The voting scan detects the S-meter level of repeater stations and automatically selects the strongest station or the first station to exceed the preset S-meter level, useful for roaming between 2 or more repeater sites. Primary and secondary channels are also programmable for the priority scan.
Mode slave scan
In the normal mode scan, you can select a scanning list independent to the channel setting. In the mode slave setting, the scanning list is automatically selected according to the operating channel.
Built-in inversion-type voice scrambler
The built-in inversion type voice scrambler provides secure conversation. When a more secure system is required, the 32 code non-rolling-type voice scrambler UT- 109R and 1020 code rolling type UT-110R are available as an option.
D-sub accessory connector
The IC-F5061 series has a D-SUB 25 pin ACC connector for connecting various external devices.
Other features
- Improved scanning functions including Tx channel, talk back and nuisance delete
- 8 DTMF autodial memories and ANI function with DTMF
- Heavy duty, dynamic microphone HM-148
- Power on password
- Radio stun and kill functions disable a lost or stolen unit over the air
- Busy repeater lockout function
- Surveillance function temporarily turns off the LED backlight and beep sound
- Convenient key assign sticker is supplied
- Microphone hanger action programmable
- Ignition sensing line
- +/- 1ppm frequency stability
- Embedded ESN
- Flash CPU for future upgrade
Supplied Accessories:
Hand microphone (HM-148)
Microphone hanger
DC power cable
Fuses
Mounting bracket kit
Key assign stickers
Download the IC-F5061 PDF brochure.
Pricing for the IC-F5061 / IC-F6061 and options.
IC-F1721 / IC-F1821 VHF Mobile Transceiver
IC-F2721 / IC-F2821 UHF Mobile Transceiver
P25 Compliant radios F1721 / F1821 (VHF) / F2721 / F2821 (UHF)
The IC-F1721/F1821/F2721/F2821 series mobiles meet the demanding needs of today's professionals. With 256 channel capacity and built-in flexible tone signalings, cross-regional public safety coverage is a reality. For organizations who run an analog radio system and must migrate to a conventional P25 digital system, Icom provides one of the best solutions. The new F1721D series mobile allows you to program P25 digital and/or FM analog mode per channel. Flash ROM capability means future upgrades and flexible customization, tailored for your system. Moreover, built-in multiple tone signaling capability and an optional voice scrambler satisfy existing analog FM system requirements. This new Icom's frequency coverage and rugged construction ensures a flexible, long life radio for you. Icom is the smart choice for current - and future - public safety communication needs.
*ICOM's P25 compliant VHF or UHF mobiles!
Interoperability
The IC-F1721D / F1821D is APCO Project 25 (P25) compliant. It ensures interoperability with other manufacturer's P25 digital radios in conventional mode.
Upgrade to digital option*
The IC-F1721D / F1821D is available in two digital versions. One version is P25 compliant out of the box. Version two is an analog only radio that is future upgradeable to P25 digital compatibility- grow into digital with Icom. (*Upgrade software available later.)
Mixed mode operation
The IC-F1721D / F1821D is compatible with both analog FM mode and P25 digital mode. Program digital and/or analog FM modes per channel. The mixed mode scan allows you to detect and receive both analog FM and P25 digital modes and to transmit either mode depending on programming.
Other features
- NAC (Network Access Code) operation provides quiet stand-by in a large group and is used to open a closed digital repeater.
- Selective call/individual call using Unit ID and talkgroup ID
- 100 Unit ID, 250 talkgroup ID memories
ICOM's F1721 / F1821 / F2721 / F2821 available versions
|
VHF
IC-F1721 (analog only without 10-keypad)
IC-F1721D (P25 digital without 10-keypad)
IC-F1821 (analog only with 10-keypad)
IC-F1821D (P25 digital with 10-keypad)
|
UHF
IC-F2721 (analog only without 10-keypad)
IC-F2721D (P25 digital without 10-keypad)
IC-F2821 (analog only with 10-keypad)
IC-F2821D (P25 digital with 10-keypad)
|
Detachable front panel
With the optional remote control kit, RMK-2 and separation cable, the front panel of the radio can be detached from the main unit. It allows you flexible installation even in limited installation space. Separation cable length is selectable from 1.9, 3.0 and 8.0m.
Dot matrix, multi-function LCD
Using a high contrast LCD, the ICF1721 / F1821 series shows operating channels, tone and other settings clearly under nearly any lighting conditions. With a dot matrix display, upper and lower case characters can be easily distinguished. In addition, you can change the display setting to show one line and 12 characters, or two lines and 24 characters via programming
Heavy-duty microphone, HM-148
The new heavy-duty hand microphone, HM-148, uses a dynamic design that is made to handle punishment. The oversized dimensions allow for easy use with gloves on. And the curl cord can be easily replaced by simply opening the case - easy maintenance for long term use.
Rugged construction
With heavy-duty construction, the ICF1721 / F1821 series is built to last. The ICF1721/D incorporates a 4W speaker in an impact resistant polycarbonate front panel for crisp clear audio, and the IC-F1821/D has a backlit 10-keypad for extended operation. The 10-keypad version is supplied with an external speaker.
Built-in versatile tone signaling
Use the built-in CTCSS, DTCS, 2-Tone or 5-Tone capability to set up your own talk groups, and have your radio standby quietly when other groups are talking. You can also set up selective calls to individuals or control a repeater.
Multiple 2-Tone, Multiple 5-Tone
Encode or decode up to 10 2-Tone, 8 5-Tone codes on a single memory channel. This is perfect for professionals who require multiple district paging on one channel. When a matched tone is received, the following items are programmable for each code.
- Bell icon
- Answer back
- Stun
- Beep sound
- Auto transmit
- Scan
- External out
256 memory channels, 32 zones
Up to 256 memory channels can be divided into 32 memory zones, and allows you quick access to the intended channel.
Tactical group function
The tactical group function allows you to copy memory channels into a new memory zone (using Zone 32) without using PC programming. This function allows you to construct a temporary work group on site for working with inter organization groups, such as in case of a large scale disaster power versions are also available for reliable long distance communications. (VHF : 50W, UHF : 45W)
Built-in inversion type voice scrambler
The IC-F1721/F1821 series includes a built-in inversion type voice scrambler in all models. When a more secure system is required, the optional voice scrambler unit UT-109 or UT-110 is available.
* These voice scrambler functions are not available in digital mode.
Other features
- Microphone hanger action programmable (Scan, monitor, priority channel)
- Optional OPC-617 D-SUB 9 pin connector for dimmer control, modem connection
- D-SUB 25 pin connector for future PC connection
- Built-in audio compander (Analog mode only)
- Wide frequency coverage (136-174MHz)
- LTR® Trunking system capability with the optional UT-111 installed.
- PC programming capability
- 7 group IDs
- 24-status Messages
- Send 8-character SDM (Short Data Message)
- Receive up to 95 characters of free text
Supplied accessories
- Heavy Duty hand microphone (HM-148)
- DC power cable
- Fuses
- Mounting bracket kit
- Key assign stickers
- External speaker (for F1821/F2821 versions)
IC-F2020 Mobile UHF Transceiver
(Discontinued, But One Left)
Ultra compact, ultra capable... and priced right!
- Dimensions: 5.9 (W), 2.0 (H), 7.1 (D), 3.3 lb
- 35 W output power
- 4 W audio output
- 400-430 MHz or 450-470 MHz
- 32 channels standard, up to 160 channels optional
- Programmable control functions
- 9600 baud data compatible
- CTCSS and DTCSS are standard
- Large alphanumeric display
- 7 DTMF memories
- Normal scan and priority scan
- Selectable transmit power
- Emergency call (DTMF code) with single or repeat function
- Programmable password security
- MIL SPEC C/D/E
- Available with SmarTrunk II® trunking
Download the IC-F1020/F2020 Series PDF brochure.
Download the IC-F1020/F2020 Series PDF owner's manual.
More detailed IC-F2020 specifications and
options.
Pricing for the IC-F2020 and options.
Back to the top
SmarTrunk is a trademark of SmarTrunk Systems, Inc.