IC-M802 Specifications

General

• Frequency coverage (Unit : MHz):
  • Rx 0.5–29.9999 (continuous)
  • Tx
    • 1.6– 2.9999, 4.0– 4.9999, 6.0–6.9999
    • 8.0– 8.9999, 12.0–13.9999, 16.0–17.9999
    • 18.0–19.9999, 22.0–22.9999, 25.0–27.5000
• Type of emission :
  • J3E (SSB), J2B (AFSK), F1B
  • (FSK), A1A (CW), H3E (AM*), (*Rx only)
• Number of channels : 1355 (max.)
  • 160 user programmable
  • 249 ITU SSB duplex
  • 72 ITU SSB simplex
  • 662 ITU FSK duplex
  • 160 e-mail
  • 21 ITU 4MHz simplex
  • 31 ITU 8MHz simplex
• Antenna impedance : 50 ohm (SO-239)
• Power supply requirement : 13.6V DC ±15%
• Max. current drain (at 13.6V DC):
  • Tx (Max. power) 30A (typ.)
  • Rx (Max. audio) 3.0A
• Operating temp. range :
  • –30°C to +60°C; –22°F to +140°F
  • Guaranteed range : –20°C to +55°C; –4°F to +131°F
• Frequency stability : ±10Hz (at –20°C to +55°C)
• Dimensions (W × H × D; projections not included):
  • Main unit 240 × 94 × 238.4 mm; 9 7/16 × 3 11/16 × 9 3/8 in
  • Controller 220 × 110 × 84.4 mm; 8 21/32 × 4 11/32 × 3 5/16 in
  • Speaker 110 × 110 × 84.4 mm; 4 11/32 × 4 11/32 × 3 5/16 in
• Weight :
  • Main unit 4.7 kg; 10.36 lb
  • Controller 570 g; 1.26 lb
  • Speaker 370 g; 0.81 lb

Transmitter

• Output power : 150, 60, 20W PEP (Selectable)
• Spurious emissions : –62dB
• Unwanted sideband : 55dB
• Carrier suppression : 40dB
• Microphone impedance : 600 ohm

Receiver

• Sensitivity (at 10dB S/N) :

  	J3E, A1A	J2B, F1B	H3E	DSC (J2B)
  0.5 – 1.5999MHz	6.3µV	–	32µV	0.5µV (at 1% error rate)
  1.6 – 1.7999MHz	0.89µV	0.89µV	6.3µV
  1.8 – 3.9999MHz	0.5µV	0.5µV	3.2µV
  4.0 –29.9999MHz			–

  
  

  Spurious response rejection ratio:

  • (1.6–29.9999MHz) More than 70dB

  Audio output power (at 13.6V DC): 4.0W typical at 10% distortion with a 4 ohm load

  Audio output impedance: 4–8 ohm

  Clarity variable range : ±150Hz

  GPS interface : NMEA 0183 version 2.0 or later

Supplied Accessories

• Separation cable, OPC-1106 (5m; 16.4ft)
• Hand microphone, HM-135
• External speaker, SP-24
• Mounting bracket kits
• Microphone hanger
• DC power cables
• ACC plugs
• Spare fuses

Options

• AT-140 HF AUTOMATIC ANTENNA TUNER: Matches the transceiver to a long wire antenna with little insertion loss. Cable connections are easy to install. AT-130 is also available.
• MN-100 ANTENNA MATCHER: Match the transceiver to a dipole antenna. Covers all HF bands from 1.5 to 30MHz. Two 8m antenna wires come attached.
• MN-100L ANTENNA MATCHER: Match the transceiver to a longwire antenna. Covers all HF bands from 1.5 to 30MHz. A 15m antenna wire comes attached.
• PS-60 DC POWER SUPPLY: Provides 13.6V DC (30A) output from an AC outlet.
• PS-66 DC-DC CONVERTER: Provides 13.6V DC (30A) output from 19–32V DC.
• MB-75 FLUSH MOUNT KIT: For mounting the controller or speaker to a panel.
• SP-24 EXTERNAL SPEAKER: 4×4-inch external speaker. Same as supplied. Input impedance: 4 ohm. Max. input power: 7W.
• AH-710 FOLDED DIPOLE ANTENNA: Covers 1.9 to 30MHz band. Has an SO-239 connector and 30m coaxial cable. Easy to assemble.
• RC-25 REMOTE CONTROLLER: Remote controller head. Same as supplied.
• HM-135 HAND MICROPHONE: Remote function mic. Same as supplied.
• OPC-1106 SEPARATION CABLE: 5m (16.4ft) separation cable between controller and main unit. Same as supplied.
• OPC-1147 SHIELD CONTROL CABLE: 10m (32.8ft) shield cable to control AT-140.

Back to the main index page
Back to IC-M802