Hy-Com Communications Ltd.

• Memo banks
• Automatic DTMF transmission linked to PTT (ANI)
• Standard CTCSS with 51 frequencies (plus 1 programmable)
• Standard DTCS with selectable polarity
• 5 scan channel groups, 10 with the 160 channel option
• 2 priority channels
• Scan start and/or tone squelch as the microphone on hook function
• Priority channel selection and/or receive monitor as the microphone off hook function
• Power ON scan start
• Reverse burst equivalent
• Transpond capability (optional 2-tone decoder unit necessary)
• Talk around function
• Time-out timer with penalty time
• Transmit lockout (CTCSS/channel busy)
• 2 selectable 'stun' functions (optional 2-tone decoder unit required)
• External I/O terminal socket (optional OPC-617 required) for PA, horn honk, dimmer and 9600 baud data.
• Advanced programming package for PC

• Frequency Coverage:

  400-430 MHz #01

  450-470 MHz #02

  470-490 MHz #03

  490-512 MHz #04

• Mode: 16K0F3E
• Number of memory channels: 32 (standard), 160 (optional)
• Channel spacing: 25 kHz and 30 kHz
• Power Supply Requirement: 13.6 V DC ±15% (negative ground)
• Current drain (at 13.6 V DC; typical):

  High: 8 A

  Low: 4 A

  Squelched: 700 mA

  Max. audio power: 1.2 A

• Usable Temperature Range: -30°C to +60°C; -22°F to +140°F
• Frequency stability: ±5 ppm
• Dimensions (projections not included): 150(W) x 50(H) x 180(D) mm; 5.91(W) x 1.97(H) x 7.09(D) in
• Weight: 1.5 kg; 3 lb 5 oz

TRANSMITTER

• Output power:

  High: 45 W

  Low: 4.5 W

• Max. frequency deviaton: ±5.0 kHz
• Spurious emissions: 70 dB minimum
• Harmonic emissions: 70 dB minimum
• Hum and noise: 45 dB typical

RECEIVER

• Sensitivity (for 12 dB SINAD): 0.25 µV typical
• Squelch sensitivity: 0.25 µV
• Selectivity:

  WFM: More than 150 kHz/-6 dB

  FM, AM-W: More than 12 kHz/-6 dB

  AM, FM-N: More than 5.5 kHz/-6 dB

  AM-N, SSB, CW: More than 2.2 kHz/-6 dB

• Adjacent channel selectivity: 75 dB typical
• Intermodulation rejection: 70 dB typical
• Spurious response rejection: 80 dB typical
• Hum and noise: 45 dB typical
• Audio Output Power: 4 W typical at 5% distortion with a 4 ohms load.

• EX-1761 MEMORY EXPANSION UNIT: Expands memory channels to 160 from 32.
• HM-100TN DTMF HAND MIKE: DTMF mike for accessing interconnects, etc.
• SM-25 DESK MIKE: For base station use.
• OPC-617 ACCESSORY CABLE: Allows access to signals inside the radio for data and repeater use.
• RMK-1 SEPARATION KIT: For front panel detachment installation. One of the following 3 cables must be used with this kit: OPC-607 (3 m), OPC-608 (8 m) or OPC-609 (1.9 m).
• SP-5 EXTERNAL SPEAKER: Large speaker for excellent audio quality. Input impedance: 4 ohms. Max. input power: 5 W
• SP-10 EXTERNAL SPEAKER: Compact and easy-to-install. Input impedance: 4 ohms. Max. input power: 5 W
• UT-80 2-TONE UNIT: Provides 2-tone decoder capability.
• UT-96 5-TONE UNIT: Provides 5-tone decoder capabilities as well as 2-tone decoder capabilities via PC programming.
• EX-1764/OPC-478/OPC-592 FIELD PROGRAMMING SOFTWARE AND CLONING CABLES FOR DEALERS ONLY
• OPC-591 CLONING CABLE: For cloning between transceivers (dealers only).
• Zetron ® DTMF mike available

Back to the main index page
Back to IC-F2020 Summary